VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

7220CYP4 Nachi Angular Contact Bearing 100x180x34 Abec-7 Japan Large
7220CYP4 Nachi Angular Contact Bearing 100x180x34 Abec-7 Japan Large


 
Our Price: $965.88
. Item: 7220CYP4 Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 100mm x 180mm x 34mm/Metric

Stock Status:In Stock
Product Code: KIT10866
Qty:

Description
 
High Precision Ball Bearing
7220CYP4 Nachi Angular Ball Bearing
15 degrees Contact Angle
Abec-7
100mm x 180mm x 34mm
Made in Japan


"7220CYP4
"7220CYP4
"7220CYP4

7220CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan.

  • Item: 7220CYP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 100mm x 180mm x 34mm/Metric
  • ID (inner diameter)/Bore: 100mm
  • OD (outer diameter): 180mm
  • Width/Height/thickness: 34mm
  • Size: 100 x 180 x 34 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 150,000 N
  • Static load rating Cor: 128,000 N
  • Limiting Speed:
    • Grease Lubrication: 5,700 RPM
    • Oil Lubrication: 7,900 RPM
  • Made in Japan


Dimensions
d D B r r1 a
100mm 180mm 34mm 2.1mm 1.1mm -0.8mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10866


Share your knowledge of this product. Be the first to write a review »