VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7216CYP5 Nachi Angular Contact Bearing 80x140x26:Abec-5:Japan
7216CYP5 Nachi Angular Contact Bearing 80x140x26:Abec-5:Japan


 
Our Price: $333.37
. Item: 7216CYP5 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Dimensions: 80mm x 140mm x 26mm/Metric
. Bearing Inner Diameter: 80mm
. Bearing Outer Diameter: 140mm

Stock Status:In Stock
Product Code: KIT10820
Qty:

Description
 
7216CYP5 Nachi Angular Abec-5 Ball Bearing
15 Contact Angl
Polyamide resin cage
80mm x 140mm x 26mme
Made in Japan







7216CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7216CYP5, the 7216CYP5 inner diameter is 80mm, the 7216CYP5 outer diameter is 140mm, 7216CYP5 width is 26mm.

  • Item: 7216CYP5 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 80mm x 140mm x 26mm/Metric
  • Bearing Inner Diameter: 80mm
  • Bearing Outer Diameter: 140mm
  • Bearing Width: 26mm
  • Cage: Polyamide resin cage
  • Quality: ABEC-5
  • Made in Japan
  • Quantity: One Bearing


dDBrr1
80mm140mm26mm2 1

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10820


Share your knowledge of this product. Be the first to write a review »