VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

  7214CYP5 Nachi Angular Contact Bearing 70x125x24:Abec-5:Japan
7214CYP5 Nachi Angular Contact Bearing 70x125x24:Abec-5:Japan


 
Our Price: $253.37
. Item: 7214CYP5 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Dimensions: 70mm x 125mm x 24mm/Metric
. Bearing Inner Diameter: 70mm
. Bearing Outer diameter: 125mm

Stock Status:In Stock
Product Code: KIT10818
Qty:

Description
 
7214CYP5 Nachi Angular Abec-5 Ball Bearing
15 Contact Angle
Polyamide resin cage
70mm x 125mm x 24mm
Made in Japan







7214CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7214CYP5, the 7214CYP5 inner diameter is 70mm, the 7214CYP5 outer diameter is 125mm, 7214CYP5 width is 24mm.

  • Item: 7214CYP5 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 70mm x 125mm x 24mm/Metric
  • Bearing Inner Diameter: 70mm
  • Bearing Outer diameter: 125mm
  • Bearing Width: 24mm
  • Cage: Polyamide resin cage
  • Quality: ABEC-5
  • Size: 70mm x 125mm x 24mm
  • Made in Japan
  • Quantity: One Bearing
dDBrr1
70mm125mm24mm1.5 1

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »