VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

  7213 Nachi Angular Contact Bearing 65x120x23 C3 Japan Bearings
7213 Nachi Angular Contact Bearing 65x120x23 C3 Japan Bearings


 
Our Price: $60.88
. Item: 7213 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Steel Cage
. Dimensions: 65mm x 120mm x 23mm/Metric
. ID (inner diameter)/Bore: 65mm

Stock Status:In Stock
Product Code: KIT10023
Qty:

Description
 
7213 Nachi Angular Ball Bearing
40 Contact Angle
Steel Cage
65mm x 120mm x 23mm
Made in Japan


"7213
"7213

7213 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, Made in Japan, inner diameter is 65mm, outer diameter is 120mm and width is 23mm.

  • Item: 7213 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 65mm x 120mm x 23mm/Metric
  • ID (inner diameter)/Bore: 65mm
  • OD (outer diameter): 120mm
  • Width/Height/thickness: 23mm
  • Size: 65 x 120 x 23 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 70,000 N
  • Static load rating Cor: 57,800 N
  • Limiting Speed:
    • Grease Lubrication: 4,900 RPM
    • Oil Lubrication: 6,500 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »