VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

  7212CYP5 Nachi Angular Contact Bearing 60x110x22:Abec-5:Japan
7212CYP5 Nachi Angular Contact Bearing 60x110x22:Abec-5:Japan


 
Our Price: $195.88
. Item: 7212CYP5 Angular Ball Bearings
. Dimensions: 60*110*22 mm/Metric
. ID (inner diameter)/Bore=60mm
. OD (outer diameter D1)=110mm
. Width/Height/thickness=22mm

Stock Status:In Stock
Product Code: KIT10816
Qty:

Description
 

Nachi Angular Ball Bearings
7212CYP5
60mm x 110mm x 22mm
15 Contact Angle
Polyamide resin cage
Abec-5
Made in Japan







7212CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7212CYP5, the 7212CYP5 inner diameter is 60mm, the 7212CYP5 outer diameter is 110mm, 7212CYP5 width is 22mm.

  • Item: 7212CYP5 Angular Ball Bearings
  • Dimensions: 60*110*22 mm/Metric
  • ID (inner diameter)/Bore=60mm
  • OD (outer diameter D1)=110mm
  • Width/Height/thickness=22mm
  • 7212CYP5 Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-5
  • Basic Dynamic Load Cr (KN): 64.5
  • Size: 60mm x 110mm x 22mm
  • Made in Japan
  • Quantity: One Bearing 7212CYP5
d D B r r1 Basic Dynamic Load
60mm 110mm 22mm 1.5 1 64.5

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »