VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

7211CYDUP4 Nachi Angular Contact Bearing 55x100x21 ABEC 7
7211CYDUP4 Nachi Angular Contact Bearing 55x100x21 ABEC 7


 
Our Price: $449.37
. Item: 7211CYDUP4 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 55mm x 100mm x 21mm/Metric

Stock Status:In Stock
Product Code: KIT10899
Qty:

Description
 
7211CYDUP4 Nachi Angular Contact Abec-7 Ball Bearing
55mm x 100mm x 21mm
Made in Japan


"7211CYDUP4
"7211CYDUP4
"7211CYDUP4

7211CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7211CYDUP4 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 55mm x 100mm x 21mm/Metric
  • Bearing Inner Diameter: 55mm
  • Bearing Outer Diameter: 100mm
  • Width/Height/thickness; 21mm
  • Size: 17 x 40 x 12 mm
  • Quantity: One Bearing
  • Made in Japan


Dimensions
dDBrr1a
55mm100mm21mm1mm 1.5mm -1.6mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10899


Share your knowledge of this product. Be the first to write a review »