VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

  7210BMU Nachi Angular Contact Bearing 50x90x20 Brass Cage C3 Bearings
7210BMU Nachi Angular Contact Bearing 50x90x20 Brass Cage C3 Bearings


 
Our Price: $71.88
. Item: 7210BMU Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Brass Cage
. Radial Clearance: C3
. Dimensions: 50mm x 90mm x 20mm/Metric

Stock Status:In Stock
Product Code: KIT9975
Qty:

Description
 
7210BMU Nachi Angular Ball Bearing
40 Contact Angle
Brass Cage & Flush Ground
50mm x 90mm x 20mm
Made in Japan


"7210BMU
"7210BMU

7210BMU Nachi Angular Ball Bearings, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 50mm, outer diameter is 90mm and width is 20mm.

  • Item: 7210BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Brass Cage
  • Radial Clearance: C3
  • Dimensions: 50mm x 90mm x 20mm/Metric
  • ID (inner diameter)/Bore: 50mm
  • OD (outer diameter): 90mm
  • Width/Height/thickness: 20mm
  • Size: 50 x 90 x 20 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 38,500 N
  • Static load rating Cor: 29,600 N
  • Limiting Speed:
    • Grease Lubrication: 5,600 RPM
    • Oil Lubrication: 7,500 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit9975


Share your knowledge of this product. Be the first to write a review »