VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7210 Nachi Angular Contact Bearing C3 Japan 50x90x20 Bearings
7210 Nachi Angular Contact Bearing C3 Japan 50x90x20 Bearings


 
Our Price: $43.37
. Item: 7210 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Steel Cage
. Dimensions: 50mm x 90mm x 20mm/Metric
. ID (inner diameter)/Bore: 50mm

Stock Status:In Stock
Product Code: KIT10020
Qty:

Description
 
7210 Nachi Angular Ball Bearing
40 Contact Angle & Steel Cage
Made in Japan


"7210
"7210

7210 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, inner diameter is 50mm, outer diameter is 90mm and width is 20mm.

  • Item: 7210 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 50mm x 90mm x 20mm/Metric
  • ID (inner diameter)/Bore: 50mm
  • OD (outer diameter): 90mm
  • Width/Height/thickness: 20mm
  • Size: 50 x 90 x 20 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 41,000 N
  • Static load rating Cor: 31,500 N
  • Limiting Speed:
    • Grease Lubrication: 6,300 RPM
    • Oil Lubrication: 8,500 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10020


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
bearing June 28, 2016
Reviewer: william griffin from midvale, ID United States  
just what i needed

Was this review helpful to you?