VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7209CYDUP4 Nachi Angular Contact Bearing 45x85x19 Abec-7 Bearings
7209CYDUP4 Nachi Angular Contact Bearing 45x85x19 Abec-7 Bearings


 
Our Price: $391.88
. Item: 7209CYDUP4 Nachi Ball Bearings
. Type: Nachi Angular Ball Bearings
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 45mm x 85mm x 19mm/Metric

Stock Status:In Stock
Product Code: KIT10897
Qty:

Description
 
High Precision Ball Bearings
7209CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
Abec-7
45mm x 85mm x 19mm
Made in Japan


"7209CYDUP4
"7209CYDUP4
"7209CYDUP4
"7209CYDUP4

7209CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings are 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7209CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 45mm x 85mm x 19mm/Metric
  • ID (inner diameter)/Bore: 45mm
  • OD (outer diameter): 85mm
  • Width/Height/thickness: 19mm
  • Size: 45 x 85 x 19 mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 66,500 N
  • Static load rating Cor: 58,000 N
  • Limiting Speed:
    • Grease Lubrication: 9,600 RPM
    • Oil Lubrication: 13,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
45mm 85mm 19mm 1.1mm 0.6mm -2mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10897


Share your knowledge of this product. Be the first to write a review »