VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

  7208BMU Nachi Angular Contact Bearing Brass Cage C3 40x80x18 Bearings
7208BMU Nachi Angular Contact Bearing Brass Cage C3 40x80x18 Bearings


 
Our Price: $53.77
. Item: 7208BMU Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Brass Cage
. Radial Clearance: C3v
. Dimensions: 40mm x 80mm x 18mm/Metric

Stock Status:In Stock
Product Code: KIT9973
Qty:

Description
 
7208BMU Nachi Angular Ball Bearing
40 Contact Angle
Brass Cage & Flush Ground
40mm x 80mm x 18mm
Made in Japan


"7208BMU
"7208BMU

7208BMU Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 40mm, outer diameter is 80mm and width is 18mm.

  • Item: 7208BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Brass Cage
  • Radial Clearance: C3v
  • Dimensions: 40mm x 80mm x 18mm/Metric
  • ID (inner diameter)/Bore: 40mm
  • OD (outer diameter): 80mm
  • Width/Height/thickness: 18mm
  • Size: 40 x 80 x 18 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 33,000 N
  • Static load rating Cor: 23,700 N
  • Limiting Speed:
    • Grease Lubrication: 6,700 RPM
    • Oil Lubrication: 9,200 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit9973


Average Rating: 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Cost Effective Purchase May 9, 2013
Reviewer: Lazy Larry from Plymouth, MI  
Good maintenance item.

Was this review helpful to you?