VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7207CYDUP4 Nachi Angular Contact Bearing 35x72x17:Abec-7:Japan
7207CYDUP4 Nachi Angular Contact Bearing 35x72x17:Abec-7:Japan


 
Our Price: $305.37
. Item: 7207CYDUP4 Angular Ball Bearings
. Type: Nachi Angular Ball Bearings
. Dimensions: 35mm x 72mm x 17mm/Metric
. Bearing Inner Diameter: 35mm
. Bearing Outer Diameter: 72mm

Stock Status:In Stock
Product Code: KIT10895
Qty:

Description
 

7207CYDUP4 Nachi Angular Ball Bearings
High Precision Ball Bearings
35mm x 72mm x 17mm
15 Degree Contact Angle
Abec-7
Made in Japan






7207CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings (2 duplex bearings), ABEC-7 (P4) quality and made in Japan, here are the dimensions of the 7207CYDUP4, the 7207CYDUP4 inner diameter is 35mm, the 7207CYDUP4 outer diameter is 72mm, 7207CYDUP4 width is 17mm.

  • Item: 7207CYDUP4 Angular Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Dimensions: 35mm x 72mm x 17mm/Metric
  • Bearing Inner Diameter: 35mm
  • Bearing Outer Diameter: 72mm
  • Bearing Width: 17mm
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Size: 35mm x 72mm x 17mm
  • Quantity: Pair of Bearing
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10895


Share your knowledge of this product. Be the first to write a review »