VXB Ball Bearings

 





  Home > Metric Bearings > 30mm inner diameter Bearings >

  7206CYP4 Nachi Angular Contact Bearing 30x62x16 Abec-7 Japan Bearings
7206CYP4 Nachi Angular Contact Bearing 30x62x16 Abec-7 Japan Bearings


 
Our Price: $157.37
. Item: 7206CYP4 Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 30mm x 62mm x 16mm/Metric

Stock Status:In Stock
Product Code: KIT10852
Qty:

Description
 
High Precision Ball Bearing
7206CYP4 Nachi Angular Ball Bearing
15 degrees Contact Angle
Abec-7
30mm x 62mm x 16mm
Made in Japan


"7206CYP4
"7206CYP4
"7206CYP4

7206CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan, inner diameter is 30mm, outer diameter is 62mm and width is 16mm.

  • Item: 7206CYP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 30mm x 62mm x 16mm/Metric
  • ID (inner diameter)/Bore: 30mm
  • OD (outer diameter): 62mm
  • Width/Height/thickness: 16mm
  • Size: 30 x 62 x 16 mm
  • Quantity: One Bearing
  • Limiting Speed:
    • Grease Lubrication: 18,000 RPM
    • Oil Lubrication: 24,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
30mm 62mm 16mm 1mm 0.6mm -2.7mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10852


Share your knowledge of this product. Be the first to write a review »