VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

  7205 Nachi Angular Contact Bearing 25x52x15 C3 Japan Bearings
7205 Nachi Angular Contact Bearing 25x52x15 C3 Japan Bearings


 
Our Price: $19.95
. Item: 7205 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Steel Cage
. Dimensions: 25mm x 52mm x 15mm/Metric
. ID (inner diameter)/Bore: 25mm

Stock Status:In Stock
Product Code: KIT10015
Qty:

Description
 
7205 Nachi Angular Ball Bearings
40 Contact Angle & Steel Cage
Made in Japan


"7205
"7205

7205 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, inner diameter is 25mm, outer diameter is 52mm and width is 15mm.

  • Item: 7205 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 25mm x 52mm x 15mm/Metric
  • ID (inner diameter)/Bore: 25mm
  • OD (outer diameter): 52mm
  • Width/Height/thickness: 15mm
  • Size: 25 x 52 x 15 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 16,200 N
  • Static load rating Cor: 10,200 N
  • Limiting Speed:
    • Grease Lubrication: 12,000 RPM
    • Oil Lubrication: 15,000 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10015


Share your knowledge of this product. Be the first to write a review »