VXB Ball Bearings

 





  Home > Metric Bearings > 15mm inner diameter Bearings >

  7202CYP5 Nachi Angular Contact Bearing 15x35x11:Abec-5:Japan
7202CYP5 Nachi Angular Contact Bearing 15x35x11:Abec-5:Japan


 
Our Price: $71.77
. Item: 7202CYP5 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Dimensions: 15mm x 35mm x 11mm/Metric
. Bearing Inner Diameter: 15mm
. Bearing Outer Diameter: 35mm

Stock Status:In Stock
Product Code: KIT10806
Qty:

Description
 
7202CYP5 Nachi Angular Ball Bearing
15mm x 35mm x 11mm
15 Contact Angle
Polyamide resin cage
Abec-5
Made in Japan


7202CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7202CYP5 inner diameter is 15mm, 7202CYP5 outer diameter is 35mm, 7202CYP5 width is 11mm.

  • Item: 7202CYP5 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 15mm x 35mm x 11mm/Metric
  • Bearing Inner Diameter: 15mm
  • Bearing Outer Diameter: 35mm
  • Bearing Width: 11mm
  • Size: 15mm x 35mm x 11mm
  • Quality: ABEC-5
  • Cage: Polyamide resin cage
  • Basic Dynamic Load Cr (KN): 8.70
  • Made in Japan
  • Quantity: One Bearing


dDBrr1
15mm35mm11mm0.6 0.3

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10806


Share your knowledge of this product. Be the first to write a review »