VXB Ball Bearings

 





  Home > Metric Bearings > 15mm inner diameter Bearings >

  7202 Nachi Angular Contact Bearing C3 Japan 15x35x11 Bearings
7202 Nachi Angular Contact Bearing C3 Japan 15x35x11 Bearings


 
Our Price: $19.95
. Item: 7202 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Steel Cage
. Dimensions: 15mm x 35mm x 11mm/Metric
. ID (inner diameter)/Bore: 15mm

Stock Status:In Stock
Product Code: KIT10012
Qty:

Description
 
7202 Nachi Angular Contact Ball Bearing
40 Contact Angle & Steel Cage
Made in Japan


"7202
"7202

7202 Nachi Angular Ball Bearing, Steel Cage and Flush Ground, inner diameter is 15mm, outer diameter is 35mm and width is 11mm.

  • Item: 7202 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 15mm x 35mm x 11mm/Metric
  • ID (inner diameter)/Bore: 15mm
  • OD (outer diameter): 35mm
  • Width/Height/thickness: 11mm
  • Size: 15 x 35 x 11 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 9,050 N
  • Static load rating Cor: 4,700 N
  • Limiting Speed:
    • Grease Lubrication: 17,000 RPM
    • Oil Lubrication: 23,000 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10012


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
High Quality Bearings May 13, 2011
Reviewer: Mustang Joe from Cincinnati, Ohio  
High quality nachi bearings  at a considerably lower cost than my local nachi dealer here in cincinnat () roughly 35-40% cheaper across the board on this site...thanks.

Was this review helpful to you?