VXB Ball Bearings

 





  Home > Metric Bearings > 12mm inner diameter Bearings >

7201CYP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Japan Bearings
7201CYP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Japan Bearings


 
Our Price: $107.37
. Item: 7201CYP4 Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 12mm x 32mm x 10mm/Metric

Stock Status:In Stock
Product Code: KIT10847
Qty:

Description
 
High Precision Ball Bearing
7201CYP4 Nachi Angular Ball Bearing
15 degrees Contact Angle
Abec-7
12mm x 32mm x 10mm
Made in Japan


7201CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, ABEC-7 (P4) quality and made in Japan, inner diameter is 12mm, outer diameter is 32mm and width is 10mm.

  • Item: 7201CYP4 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 12mm x 32mm x 10mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 32mm
  • Width/Height/thickness: 10mm
  • Size: 12 x 32 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 7,950 N
  • Static load rating Cor: 3,900 N
  • Limiting Speed:
    • Grease Lubrication: 36,000 RPM
    • Oil Lubrication: 50,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
12mm 32mm 10mm 0.6mm 0.3mm -2.5mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10847


Share your knowledge of this product. Be the first to write a review »