VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

  7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings
7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings


 
Our Price: $14.37
. Item: 7201 Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Steel Cage
. Dimensions: 12mm x 32mm x 10mm/Metric
. ID (inner diameter)/Bore: 12mm

Stock Status:In Stock
Product Code: KIT10011
Qty:

Description
 

7201 Nachi Angular Ball Bearing
40 Contact Angle & Steel Cage
Made in Japan


"7201
"7201

7201 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, Made in Japan, inner diameter is 12mm, outer diameter is 32mm and width is 10mm.

  • Item: 7201 Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 12mm x 32mm x 10mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 32mm
  • Width/Height/thickness: 10mm
  • Size: 12 x 32 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 7,600 N
  • Static load rating Cor: 3,960 N
  • Limiting Speed:
    • Grease Lubrication: 20,000 RPM
    • Oil Lubrication: 27,000 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10011


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Bearings August 24, 2015
Reviewer: Elrod Machne from Flagstaff AZ  
The produscts from VXB are grat quality. Service is very good and quality is the best.  VXB is a good supplier for our bearings

Was this review helpful to you?