VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

  7026CDUP4 Nachi Angular Contact Bearing 130x200x33 Abec-7 Bearings
7026CDUP4 Nachi Angular Contact Bearing 130x200x33 Abec-7 Bearings


 
Our Price: $3,605.77
. Item: 7026CDUP4 Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 130mm x 200mm x 33mm/Metric

Stock Status:In Stock
Product Code: KIT13461
Qty:

Description
 
High Precision Ball Bearing
7026CDUP4 Nachi Angular Ball Bearing
15 degrees Contact Angle
Abec-7
130mm x 200mm x 33mm
Made in Japan


"7026CDUP4
"7026CDUP4
"7026CDUP4

7026CDUP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan,

  • Item: 7026CDUP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 130mm x 200mm x 33mm/Metric
  • ID (inner diameter)/Bore: 130mm
  • OD (outer diameter): 200mm
  • Width/Height/thickness: 33mm
  • Size: 130 x 200 x 33 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 130,000 N
  • Static load rating Cor: 138,000 N
  • Limiting Speed:
    • Grease Lubrication: 4,800 RPM
    • Oil Lubrication: 6,700 RPM
  • Made in Japan


Dimensions (mm)
d D B r r1 a
130 200 33 2~3.5 1~1.9 2.5

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »