VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

  7014CYP4 Nachi Angular Contact Bearing 70x110x20 Abec-7 Japan Bearings
7014CYP4 Nachi Angular Contact Bearing 70x110x20 Abec-7 Japan Bearings


 
Our Price: $359.37
. Item: 7014CYP4 Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 70mm x 110mm x 20mm/Metric

Stock Status:In Stock
Product Code: KIT10839
Qty:

Description
 
High Precision Ball Bearing
7014CYP4 Nachi Angular Ball Bearing
15 Contact Angle
Abec-7
70mm x 110mm x 20mm
Made in Japan


"7014CYP4
"7014CYP4
"7014CYP4

7014CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan.

  • Item: 7014CYP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 70mm x 110mm x 20mm/Metric
  • ID (inner diameter)/Bore: 70mm
  • OD (outer diameter): 110mm
  • Width/Height/thickness: 20mm
  • Size: 70 x 110 x 20 mm
  • Limiting Speed:
    • Grease Lubrication: 8,900 RPM
    • Oil Lubrication: 12,000 RPM
  • Made in Japan
  • Quantity: One Bearing


Dimensions
d D B r r1 a
70mm 110mm 20mm 1.1mm 0.6mm -0.7mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Average Rating: 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Good bearings great price December 31, 2013
Reviewer: The "Flat head guy"  
I was able to repair the grinding head in my 60 year old Van Norman crank machine to new condition. The bearing tolerances are very close and the quality seems as good as the original part. Please don't stop taking phone or fax orders for those of us that do not always have internet access

Was this review helpful to you?