VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

  7014CYDUP4 Nachi Angular Contact Bearing 70x110x20 Abec-7 Bearings
7014CYDUP4 Nachi Angular Contact Bearing 70x110x20 Abec-7 Bearings


 
Our Price: $715.88
. Item: 7014CYDUP4 Nachi Ball Bearings
. Type: Nachi Angular Ball Bearings
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 70mm x 110mm x 20mm/Metric

Stock Status:In Stock
Product Code: KIT10881
Qty:

Description
 
High Precision Ball Bearings
7014CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
Abec-7
70mm x 110mm x 20mm
Made in Japan


"7014CYDUP4
"7014CYDUP4
"7014CYDUP4
"7014CYDUP4

7014CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7014CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 70mm x 110mm x 20mm/Metric
  • ID (inner diameter)/Bore: 70mm
  • OD (outer diameter): 110mm
  • Width/Height/thickness: 20mm
  • Size: 70 x 110 x 20 mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 76,500 N
  • Static load rating Cor: 86,500 N
  • Limiting Speed:
    • Grease Lubrication: 7,100 RPM
    • Oil Lubrication: 9,600 RPM
  • Made in Japan


Dimensions
d D B r r1 a
70mm 110mm 20mm 1.1mm 0.6mm 0.4mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »