VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

7012CYP4 Nachi Angular Contact Bearing 60x95x18 Abec-7 Japan Bearings
7012CYP4 Nachi Angular Contact Bearing 60x95x18 Abec-7 Japan Bearings


 
Our Price: $309.37
. Item: 7012CYP4 Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 60mm x 95mm x 18mm/Metric

Stock Status:In Stock
Product Code: KIT10837
Qty:

Description
 
High Precision Ball Bearing
7012CYP4 Nachi Angular Ball Bearing
15 degrees Contact Angle
Abec-7
60mm x 95mm x 18mm
Made in Japan


"7012CYP4
"7012CYP4
"7012CYP4

7012CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan. the 7012CYP4 inner diameter is 60mm, the 7012CYP4 outer diameter is 95mm, 7012CYP4 width is 18mm.

  • Item: 7012CYP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 60mm x 95mm x 18mm/Metric
  • ID (inner diameter)/Bore: 60mm
  • OD (outer diameter): 95mm
  • Width/Height/thickness: 18mm
  • Size: 60 x 95 x 18 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 35,500 N
  • Static load rating Cor: 30,500 N
  • Limiting Speed:
    • Grease Lubrication: 10,000 RPM
    • Oil Lubrication: 14,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
60mm 95mm 18mm 1.1mm 0.6mm -0.1mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10837


Share your knowledge of this product. Be the first to write a review »