VXB Ball Bearings


  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7010CYP5 Nachi Angular Contact Bearing 50x80x16 Abec-5 Japan
7010CYP5  Nachi Angular Contact Bearing 50x80x16:Abec-5:Japan

Our Price: $222.00

Product Code: KIT10793

7010CYP5 Nachi Angular Abec-5 Ball Bearing
50mm x 80mm x 16mm
15 Contact Angle
Polyamide resin cage
Made in Japan

7010CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7010CYP5 inner diameter is 50mm, 7010CYP5 outer diameter is 80mm, 7010CYP5 width is 16mm.

  • Item: 7010CYP5 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 50mm x 80mm x 16mm/Metric
  • Bearing Inner Diameter: 50mm
  • Bearing Outer Diameter: 80mm
  • Bearing Width: 16mm
  • Size: 50 x 80 x 16 mm
  • Cage: Polyamide resin cage
  • Quality: Abec-5
  • Basic Dynamic Load Cr (KN): 26.2
  • Made in Japan
  • Quantity: One Bearing
d D B r r1
50mm 80mm 16mm 1 0.6

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »