VXB Ball Bearings

 





  Home > Bearing By Types > Auto & Outdoor Bearing > Go Kart Bearings >

  7003CYP4BNLS Nachi Angular Contact Bearing 17x35x10:Abec-7:Japan
7003CYP4BNLS Nachi Angular Contact Bearing 17x35x10:Abec-7:Japan


 
Our Price: $95.95
. Item: 7003CYP4BNLS Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Dimensions: 17mm x 35mm x 10mm/Metric
. Bearing Inner Diameter: 17mm
. Bearing Outer Diameter: 35mm

Stock Status:In Stock
Product Code: KIT10786
Qty:

Description
 
7003CYP4BNLS Nachi Angular Abec-7 Ball Bearings
17mm x 35mm x 10mm
15 Contact Angle
Polyamide resin cage
Made in Japan


7003CYP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-7 Made in Japan, 7003CYP4BNLS inner diameter is 17mm, 7003CYP4BNLS outer diameter is 35mm, 7003CYDUP4BNLS width is 10mm.

  • Item: 7003CYP4BNLS Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 17mm x 35mm x 10mm/Metric
  • Bearing Inner Diameter: 17mm
  • Bearing Outer Diameter: 35mm
  • Bearing Width: 10mm
  • Size: 17 x 35 x 10 mm
  • Cage: Polyamide resin cage
  • Quality: ABEC-7
  • Basic Dynamic Load Cr (KN): 7.00
  • Made in Japan
  • Quantity: One Bearing
dDBrr1
17mm35mm10mm0.3 0.15 7.00

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »