VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

6815 Nachi Bearing Open Japan 75x95x10 Large
6815 Nachi Bearing Open Japan 75x95x10 Large


 
Our Price: $117.49
. Item: 6815 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Dimensions: 75mm x 95mm x 10mm/Metric
. ID (inner diameter)/Bore: 75mm
. OD (outer diameter): 95mm

Stock Status:In Stock
Product Code: KIT13434
Qty:

Description
 
6815 Nachi Open Ball Bearing
75mm x 95mm x 10mm
Made in Japan


"6815
"6815

6815 Nachi Bearing, the 6815 inner diameter is 75mm, the 6815 outer diameter is 95mm, 6815 width is 10mm.

  • Item: 6815 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Dimensions: 75mm x 95mm x 10mm/Metric
  • ID (inner diameter)/Bore: 75mm
  • OD (outer diameter): 95mm
  • Width/Height/thickness: 10mm
  • Size: 75 x 95 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 12,500 N
  • Static load rating Cor: 12,800 N
  • Limiting Speed:
    • Grease Lubrication: 6,500 RPM
    • Oil Lubrication: 7,600 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit13434


Share your knowledge of this product. Be the first to write a review »