VXB Ball Bearings

 





  Home > Bearing By Types > Sealed Ball Bearing > Rubber Sealed Bearings >

  6810RS Bearing 50x65x7 Sealed
6810RS Bearing 50x65x7 Sealed
6810RS Bearing 50x65x7 Sealed


 
Our Price: $24.95
. Name: 6810RS ball bearing
. Item: Double Sealed Ball Bearings
. 6810RS Size: 50mm x 65mm x 7mm Ball Bearings
. Dimensions: 50*65*7 mm/Metric
. Dynamic load rating Cr: 6,400 N

Stock Status:In Stock
Product Code: 6810RS
Qty:

Description
 

6810RS Ball Bearing
50x65x7 mm Sealed Bearings 6810RS

6810RS Bearing, categorized as slim section, double sealed, radial, deep groove ball bearings, 6810RS bearings are made of Chrome Steel with chrome steel balls and steel cage, 6810RS bearing are closed with rubber seals to protect the bearing from dust or any possible contamination, 6810RS bearings are sealed and self lubricated, the 6810RS inner diameter is 50mm, the 6810RS outer diameter is 65mm and the 6810RS width is 7mm, the quality is set to EMQ (electric motor quality) to ensure high speeds up to 4,800 rpm, 6810RS bearings are lubricated with grease.

  • Name: 6810RS ball bearing
  • Item: Double Sealed Ball Bearings
  • 6810RS Size: 50mm x 65mm x 7mm Ball Bearings
  • Dimensions: 50*65*7 mm/Metric
  • Dynamic load rating Cr: 6,400 N
  • Static load rating Cor: 5,800 N
  • Limiting Speed:
    • Grease Lubrication: 5,300 RPM
  • ID (inner diameter)/Bore=50mm
  • OD (outer diameter)=65mm
  • Width/Height/thickness=7mm
  • Equal: 6810-2RS1 & 6810-2RZ
  • Inner Diameter (ID): 50mm
  • Outer Diameter (OD): 65mm
  • Width/Height/Bridth (W/H/B): 7mm
  • 6810RS Quality: Electric motor quality
  • Type: Deep groove radial ball bearings
  • 6810RS Material: Chrome Steel
  • 6810RS Cage: Steel
  • Balls: Chrome Steel
  • 6810RS Closures: Double sealed with rubber seals RS/RS1/2RS1
  • 6810RS Lubrication: Self Lubricated (Grease) Bearing
  • Quantity: One Bearing 6810RS
  • Radial Clearance: C0
  • Equivalents: 61810RS1 and 6810-2RS Bearings


Average Rating: 3 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
I like those ! October 27, 2010
Reviewer: TolisOnLine from Greece  
Used in CNC rotating axis (very low RPM)   Great for high loads   Maybe not great for ultra high tolerances.

Was this review helpful to you?