VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor > Nachi Deep Groove Bearing > Nachi Open Ball Bearing >

  6309NR Nachi Open Snap Ring Bearing Japan 45x100x25
6309NR Nachi Open Snap Ring Bearing Japan 45x100x25


 
Our Price: $35.37
. Item: 6309NR Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 45mm x 100mm x 25mm/Metric
. ID (inner diameter)/Bore: 45mm

Stock Status:In Stock
Product Code: KIT12625
Qty:

Description
 
6309NR Nachi Open Snap Ring Bearing
45mm x 100mm x 25mm
Made in Japan


"6309NR
"6309NR

6309NR Nachi Open Snap Ring Bearing, Made in Japan, the 6309NR inner diameter is 45mm, the 6309NR outer diameter is 100mm and the 6309NR width is 25mm.

  • Item: 6309NR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 45mm x 100mm x 25mm/Metric
  • ID (inner diameter)/Bore: 45mm
  • OD (outer diameter): 100mm
  • Width/Height/thickness: 25mm
  • Size: 45 x 100 x 25 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 53,000 N
  • Static load rating Cor: 32,000 N
  • Limiting Speed:
    • Grease Lubrication: 7,000 RPM
    • Oil Lubrication: 8,200 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit12625


Share your knowledge of this product. Be the first to write a review »