VXB Ball Bearings

 





  Home > Bearing By Types > Sealed Ball Bearing > Rubber Sealed Bearings >

6307-2RS Bearing 35x80x21 Sealed
6307-2RS Bearing 35x80x21 Sealed
6307-2RS Bearing 35x80x21 Sealed


 
Our Price: $12.95
. Item: 6307-2RS Ball Bearing
. Type: Deep Groove Ball Bearing
. Material: Chrome Steel
. Closures: 2 Rubber Seals
. Size: 35mm x 80mm x 21mm

Stock Status:In Stock
Product Code: KIT7434
Qty:

Description
 
6307-2RS Sealed Ball Bearing
35mm x 80mm x 21mm


"6307-2RS
"6307-2RS

6307-2RS Sealed Ball Bearing, bearing is made from Chrome Steel, each bearing has 2 Rubber seals to protect the bearing from dust or any possible contamination, this is self lubricated bearing (bearing is already greased).

  • Item: 6307-2RS Ball Bearing
  • Type: Deep Groove Ball Bearing
  • Material: Chrome Steel
  • Closures: 2 Rubber Seals
  • Size: 35mm x 80mm x 21mm
  • Inner Diameter: 35mm
  • Outer Diameter: 80mm
  • Width: 21mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 33,500 N
  • Static load rating Cor: 19,200 N
  • Limiting Speed:
    • Grease Lubrication: 6,000 RPM

6307-2RS Bearing 35x80x21 Sealed


Kit7434


Average Rating: 4.5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
 
Great bearing August 11, 2013
Reviewer: woody  
Using the specification from the old bearing I ordered this one from VXB and got exactly what I needed for our front load Kenmore washer. Great price  prompt shipping  and good quality.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Will buy again from VXB May 6, 2013
Reviewer: Mark Hypes from Columbus Ohio  
Product is performing as expected. Fit was perfect. Fast shipping from company.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Product preformed well received prompt June 25, 2012
Reviewer: Mom of all trades  
Product worked as it should have.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Little more lubrication may help. March 4, 2012
Reviewer: S Singh from Parma, OH  
I had ordered these 6306-2RS Bearing (30x72x19 Sealed Ball Bearing) and 6307-2RS Bearing (35x80x21 Sealed Ball Bearing) from VXB.com through  [@] for my Kenmore front loader washer model # 41744042400. I had to replace these bearings along with the inner basket ([@] part # 131618500) and Metric Oil Shaft Seal 40 x 80 x 10 40x80x10 Double Lip. Now since I was working on my washing machine by myself I had time and wanted to make sure that I should get years of trouble free service  from my washing machine and that I don't have to do it all over again any time soon. Since bearings rotate at high speed so to reduce friction for their longer life  a good greased lubrication is a must. I pry opened the Seals of these bearings from the inner circle with 2-3 mm flat screw driver. There were about 4-5 drops of grease on only one side inside each of these bearings which is expected to lubricate the bearing when it spins. I washed the bearings with hot running water  wiped and dried them. Then I picked up "Super Tech Marine Grease" from [@]. As per the manufacturer of the Super Tech Marine Grease "Super Tech Marine Grease is a state-of-the-art lithium complex grease. This tacky grease resists water washout even under the most severe saltwater conditions. It offers superior protection against rust  corrosion  and oxidation."I filled up these bearings with Marine Grease and for those who are replacing bearings on their washing machine I would recommend them to fill same grease in the empty space in between the bearing and the outer lip seal as this way water or moisture can not make their way towards bearings.For those who are replacing the inner rotating drums of their front loader washer because of broken spider. I would recommend them to remove the spider from new drum  wash it with soapy water remove any oils then spray paint it with Rust-Oleum primer and paint. The hole for screw that holds the spider  the spider and the screw all are tapered so there are no chances of misalignment when putting these back together.I had installed these bearings in 11   2011 and do about 4-5 loads of laundry a week. I am going to update if as and when these bearings fail. But with this proper lubrication I expect them to last for kind of forever :-)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
The Right Bearing at The Right Price February 19, 2012
Reviewer: Mudge Railroad Engine Restorer  
I needed a bearing to replace a 100 year old XXXXX thrust controlling roller bearing which was very obsolete.  Your web site gave all the dimensions and a good description of the product. It is nice to deal with a company that understands the value of a customer.

Was this review helpful to you?

View All Customer Reviews