VXB Ball Bearings

 





  Home > Metric Bearings > 30mm inner diameter Bearings >

  6306 Nachi Bearing Open C3 Japan 30x72x19
6306 Nachi Bearing Open C3 Japan 30x72x19
6306 Nachi Bearing Open C3 Japan 30x72x19


 
Our Price: $16.88
. Item: 6306 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 30mm x 72mm x 19mm/Metric
. ID (inner diameter)/Bore: 30mm

Stock Status:In Stock
Product Code: KIT9871
Qty:

Description
 
6306 Nachi Bearing
30mm x 72mm x 19mm
Made in Japan


6306 Nachi Bearing, Made in Japan, the 6306 inner diameter is 30mm, the 6306 outer diameter is 72mm and the 6306 width is 19mm.

Bearing is Grease lubricated
  • Item: 6306 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 30mm x 72mm x 19mm/Metric
  • ID (inner diameter)/Bore: 30mm
  • OD (outer diameter): 72mm
  • Width/Height/thickness: 19mm
  • Size: 30 x 72 x 19 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 26,700 N
  • Static load rating Cor: 15,000 N
  • Limiting Speed:
    • Grease Lubrication: 10,000 RPM
    • Oil Lubrication: 12,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.


Average Rating: 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Excellant service January 26, 2013
Reviewer: Bob from Henderson, Nv.  
O.E. manufacturer no longer supplies this bearing for off road use. Found this item and am pleased that I can still get parts.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
very pleased with my Nachi bearings June 19, 2011
Reviewer: Kogut Racing (vintage snow-sleds) from Glenfield,NewYork.  
Love the ease of finding what i need .Have told my friends and family and will reuse again!

Was this review helpful to you?