VXB Ball Bearings

 





  Home > Metric Bearings > 25mm inner diameter Bearings >

  6305 Nachi Bearing Open C3 Japan 25x62x17
6305 Nachi Bearing Open C3 Japan 25x62x17
6305 Nachi Bearing Open C3 Japan 25x62x17


 
Our Price: $12.95
. Item: 6305 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 25mm x 62mm x 17mm/Metric
. Bearing Inner Diameter: 25mm

Stock Status:In Stock
Product Code: KIT9870
Qty:

Description
 
6305 Nachi Bearing
25mm x 62mm x 17mm
Made in Japan


"6305
"6305

6305 Nachi Bearing, Made in Japan, Bearing inner diameter is 20mm, Bearing outer diameter is 52mm and Bearing width is 15mm.

  • Item: 6305 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 25mm x 62mm x 17mm/Metric
  • Bearing Inner Diameter: 25mm
  • Bearing Outer Diameter: 62mm
  • Bearing Width: 17mm
  • Size: 25 x 62 x 17 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 23,600 N
  • Static load rating Cor: 12,100 N
  • Limiting Speed:
    • Grease Lubrication: 12,000 RPM
    • Oil Lubrication: 14,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.


Average Rating: 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
Nachi 6305 February 12, 2015
Reviewer: Teamrude  
I build "uber" vintage race motors making 3 times original HP. This is ONLY bearing that lasts on these high rpm-high HP motors.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
I will buy this again August 25, 2013
Reviewer: frame builder  
great quality at a fair price

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Quality vs. Price January 2, 2013
Reviewer: lomg distance rider from Redding Ca  
Tranmission Bearings for a Honda motorcycle. 1/3 the price for the same exact bearing from Honda

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
very well made bearing . very quit. October 4, 2011
Reviewer: lou  
i replaced the pinon bearing in my 1985 kawaski moterclycle.

Was this review helpful to you?