VXB Ball Bearings

 





  Home > Metric Bearings > 20mm inner diameter Bearings >

  6304NR Nachi Bearing 20x52x15 Open C3 Snap Ring Japan
6304NR Nachi Bearing 20x52x15 Open C3 Snap Ring Japan


 
Our Price: $11.77
. Item: 6304NR Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearings
. Radial Clearance: C3
. Dimensions: 20mm x 52mm x 15mm/Metric
. Bearing Inner Diameter: 20mm

Stock Status:In Stock
Product Code: KIT9949
Qty:

Description
 
6304NR Nachi Bearing With Snap Ring (C clip)
20mm x 52mm x 15mm
Made in Japan


"6304NR
"6304NR

6304NR Nachi Bearing with a Snap Ring, the 6304NR inner diameter is 20mm, the 6304NR outer diameter is 52mm, 6304NR width is 15mm, Made in Japan.

  • Item: 6304NR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearings
  • Radial Clearance: C3
  • Dimensions: 20mm x 52mm x 15mm/Metric
  • Bearing Inner Diameter: 20mm
  • Bearing Outer Diameter: 52mm
  • Bearing Width: 15mm
  • Size: 20 x 52 x 15 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 15,900 N
  • Static load rating Cor: 7,900 N
  • Limiting Speed:
    • Grease Lubrication: 14,000 RPM
    • Oil Lubrication: 17,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.


Average Rating: 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
I will definitely buy this item again. October 26, 2010
Reviewer: Cubcolectr  
I use these bearings for antique tractor restoration.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Will purchase again when needed October 26, 2010
Reviewer: Charlie from Vernon, CT  
I use these bearings in the rear cover of my Winters quick change rear end of my asphault midget race car

Was this review helpful to you?