VXB Ball Bearings

 





  Home > Bearing By Types > Auto & Outdoor Bearing >

  6303ZZE Nachi Bearing Shielded C3 Japan 17x47x14
6303ZZE Nachi Bearing Shielded C3 Japan 17x47x14


 
Our Price: $8.88
. Item: 6303ZZE Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Closures: Double shielded with Metal shields Z/ZZ/2Z
. Radial Clearance: C3
. Equal: 6303 ZZ / 6303 2Z

Stock Status:In Stock
Product Code: KIT9592
Qty:

Description
 
6303ZZE Nachi Bearing
17mm x 47mm x 14mm
Made in Japan


"6303ZZE
"6303ZZE

6303ZZE Nachi Bearing, the 6303ZZE inner diameter is 17mm, the 6303ZZE outer diameter is 47mm, 6303ZZE width is 14mm.

  • Item: 6303ZZE Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Closures: Double shielded with Metal shields Z/ZZ/2Z
  • Radial Clearance: C3
  • Equal: 6303 ZZ / 6303 2Z
  • Dimensions: 17mm x 47mm x 14mm/Metric
  • ID (inner diameter)/Bore: 17mm
  • OD (outer diameter ): 47mm
  • Width/Height/thickness: 14mm
  • Size: 17 x 47 x 14 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 13,600 N
  • Static load rating Cor: 6,550 N
  • Limiting Speed:
    • Grease Lubrication: 16,000 RPM
  • Made in Japan

Advanced Shield Design Provides
Superior Protection and Quiet Operation

The shield design was optimized using dynamic analysis modeling techniques.The design profile and plate thickness provides rigidity that helps quiet operation as well asretain grease and protect against intrusion of major contamination.

  • Superior in Sealing Out Contamination
  • Superb Grease Retention
  • Quiet Operation
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

  • Average Rating: 5 of 5 Total Reviews: 5 Write a review »

      0 of 0 people found the following review helpful:
     
    I will buy from these folks again, June 10, 2015
    Reviewer: Lester from Ball Ground, GA  
    I use bearings for several different things and have no complaints.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Great Vendor! September 23, 2013
    Reviewer: Pistonslap  
    Sent the brand of bearing requested; not something "similar".

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Wheel bearing for my kawasaki h1 July 8, 2013
    Reviewer: stian from Norway  
    Very tight an precise. Perfect for my restoration. Kawasaki h1 1974

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    looks good and runs good thats good! June 9, 2011
    Reviewer: nikwave from haiku ,hawaii  
    perfect replacement for a bronze bushing in a ford fe 390 flywheel. its shielded so dust wont get inside. its cheap less than $10. perfect fit.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Good quality and price May 14, 2011
    Reviewer: jdrc from P.R.  
    Good quality and price for a hard to find products

    Was this review helpful to you?