VXB Ball Bearings

 





  Home > Metric Bearings > 17mm inner diameter Bearings >

6303-2NSE Nachi Bearing 17x47x14 Sealed C3 Japan
6303-2NSE Nachi Bearing 17x47x14 Sealed C3 Japan
6303-2NSE Nachi Bearing 17x47x14 Sealed C3 Japan


 
Our Price: $10.37
. Item: 6303-2NSE Nachi Ball Bearing
. Type: Nachi Deep Groove Ball Bearing
. Radial Clearance: C3
. Closures: Double sealed rubber seals RS/RS1/2RS1
. Dimensions: 17mm x 47mm x 14mm/Metric

Stock Status:In Stock
Product Code: KIT9728
Qty:

Description
 
6303-2NSE Nachi Ball Bearing
17mm x 47mm x 14mm
Made in Japan


6303-2NSE Nachi Bearing, Made in Japan, the 6303-2NSE inner diameter is 17mm, the 6303-2NSE outer diameter is 47mm, 6303-2NSE width is 14mm.

  • Item: 6303-2NSE Nachi Ball Bearing
  • Type: Nachi Deep Groove Ball Bearing
  • Radial Clearance: C3
  • Closures: Double sealed rubber seals RS/RS1/2RS1
  • Dimensions: 17mm x 47mm x 14mm/Metric
  • ID (inner diameter)/Bore: 17mm
  • OD (outer diameter): 47mm
  • Width/Height/thickness: 14mm
  • Size: 17 x 47 x 14 mm
  • Dynamic load rating Cr: 13,600 N
  • Static load rating Cor: 6,550 N
  • Limiting Speed:
    • Grease Lubrication: 11,000 RPM
  • Quantity: One Bearing
  • Equal: 6303 RS / 6303 2RS
  • Made in Japan


Advanced Seal Design Provides
Excellent Protection and Smooth Operation

The combination of a unique lip design and seal groove provides a labrinth and steady seal contact.Breathing mechanism avoids torque increases caused byinternal pressure variation due to changes in operating temperatures.NSE seals allow NACHI bearings to have constant smooth operation and long service life.

  • Superior in Sealing Out Dust, Dirt, and Contamination
  • Superb Grease Retention
  • Light Torque
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

  • 6303-2NSE Nachi Bearing 17x47x14 Sealed C3 Japan


    Kit9728


    Average Rating: 4.5 of 5 Total Reviews: 7 Write a review »

      0 of 0 people found the following review helpful:
     
    selection and service March 22, 2016
    Reviewer: Tad from Aberdeen, NC United States  
    The bearings are of good quality and the speed of shipping is as fast or faster than if I had ordered them locally. The price is equal to or lower than local distributors . I thank them for dependable service.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    It works as it should January 11, 2015
    Reviewer: Dex from Palmdale CA  
    It works in my bosch alternator.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    O.K. Deal if you can t find locally November 16, 2012
    Reviewer: GY6FANDAN from Louisvill Ky  
    Item was in original box and the bearings were sealed in wax plastic bag. The box has a date code on it - mine were 2008 (4 years old). I spoke with a NACHI rep I found online and he said they ussually recomed bearings being installed withen 6 to 7 years (max). I felt comfortable using them  they showed no signs of leaking and and have a good feel to them.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Used on a Suzuki GS1000G rear wheel February 18, 2012
    Reviewer: GS1000G from Florida USA  
    These were a good fit and the quality appears to be superior to the ones they replaced  which were not sealed on both sides.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Nice Bearings seem to be working well February 18, 2011
    Reviewer: Hp Ron  
    Seems too hold up well in high speed idler tentioner application.  Great seal design

    Was this review helpful to you?

    View All Customer Reviews