VXB Ball Bearings

 





  Home > Metric Bearings > 12mm inner diameter Bearings >

6301-2NSE Nachi Bearing 12x37x12 Sealed C3 Japan
6301-2NSE Nachi Bearing 12x37x12 Sealed C3 Japan
6301-2NSE Nachi Bearing 12x37x12 Sealed C3 Japan


 
Our Price: $8.37
. Item: 6301-2NSE Nachi Ball Bearing
. Type: Nachi Deep Groove Ball Bearing
. Radial Clearance: C3
. Closures: Double sealed rubber seals RS/RS1/2RS1
. Dimensions: 12mm x 37mm x 12mm/Metric

Stock Status:In Stock
Product Code: KIT9726
Qty:

Description
 
6301-2NSE Nachi Ball Bearing
12mm x 37mm x 12mm
Made in Japan


6301-2NSE Nachi Bearing, Made in Japan, the 6301-2NSE inner diameter is 12mm, the 6301-2NSE outer diameter is 37mm, 6301-2NSE width is 12mm.

  • Item: 6301-2NSE Nachi Ball Bearing
  • Type: Nachi Deep Groove Ball Bearing
  • Radial Clearance: C3
  • Closures: Double sealed rubber seals RS/RS1/2RS1
  • Dimensions: 12mm x 37mm x 12mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 37mm
  • Width/Height/thickness: 12mm
  • Size: 12 x 37 x 12 mm
  • Dynamic load rating Cr: 9,750 N
  • Static load rating Cor: 4,250 N
  • Limiting Speed:
    • Grease Lubrication: 16,000 RPM
  • Quantity: One Bearing
  • Equal: 6301 RS / 6301 2RS
  • Made in Japan

Advanced Seal Design Provides
Excellent Protection and Smooth Operation

The combination of a unique lip design and seal groove provides a labrinth and steady seal contact.Breathing mechanism avoids torque increases caused byinternal pressure variation due to changes in operating temperatures.NSE seals allow NACHI bearings to have constant smooth operation and long service life.

  • Superior in Sealing Out Dust, Dirt, and Contamination
  • Superb Grease Retention
  • Light Torque
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

  • 6301-2NSE Nachi Bearing 12x37x12 Sealed C3 Japan


    Kit9726


    Average Rating: 5 of 5 Total Reviews: 4 Write a review »

      0 of 0 people found the following review helpful:
     
    Just like OEM July 9, 2012
    Reviewer: Just Fast from Cypress, CA  
    These bearing were used to replace two idler bearings in the alternator tensioner pulley in a 2001 Nissan Pathfinder.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    great product w great price. March 10, 2012
    Reviewer: p.j.fixall from palmdale.ca.  
    use to replace worn out bearings in auto ilder belt pulleys this parts cost 80% less than buying new pulleys.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Fast shipping great price great product October 10, 2011
    Reviewer: Rogervm from Bay Area CA  
    I used these bearings for a custom belt tensioner on an early type Delta 14" wood/metal bandsaw. Nachi bearings are great quality for a very fair price. They're all I buy for any of my machinery rebuilds anymore.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Scooter Front Wheel Bearings Baja Sc150 October 10, 2011
    Reviewer: mm1966  
    Bearings are great price  but shipping needs to match prices somewhat. I shipped same bearing to Hawaii for 1 4 the price and you could too.

    Was this review helpful to you?