VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

6215NR Nachi Bearing Open C3 Snap Ring Japan 75x130x25
6215NR Nachi Bearing Open C3 Snap Ring Japan 75x130x25


 
Our Price: $71.37
. Item: 6215NR Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 75mm x 130mm x 25mm/Metric
. ID (inner diameter)/Bore: 75mm

Stock Status:In Stock
Product Code: KIT9937
Qty:

Description
 
6215NR Nachi Bearing
75mm x 130mm x 25mm
With Snap Ring (C clip)
Made in Japan


"6215NR
"6215NR

6215NR Nachi Bearing with a Snap Ring, the 6215NR inner diameter is 75mm, the 6215NR outer diameter is 130mm, 6215NR width is 25mm.

  • Item: 6215NR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 75mm x 130mm x 25mm/Metric
  • ID (inner diameter)/Bore: 75mm
  • OD (outer diameter): 130mm
  • Width/Height/thickness: 25mm
  • Size: 75 x 130 x 25 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 66,000 N
  • Static load rating Cor: 49,500 N
  • Limiting Speed:
    • Grease Lubrication: 4,800 RPM
    • Oil Lubrication: 5,600 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9937


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
stand out from the crowd December 20, 2015
Reviewer: saltie17 from Mayfield, Ky  
received the right part the first day in the time frame givin. not like going to a two stop store where you go get the part then have to go back and get the right part.

Was this review helpful to you?