VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

  6208NR Nachi Open Bearing C3 Snap Ring Japan 40x80x18
6208NR Nachi Open Bearing C3 Snap Ring Japan 40x80x18


 
Our Price: $19.37
. Item: 6208NR Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearings
. Radial Clearance: C3
. Dimensions: 40mm x 80mm x 18mm/Metric
. ID (inner diameter)/Bore: 40mm

Stock Status:In Stock
Product Code: KIT12551
Qty:

Description
 
6208NR Nachi Bearing With Snap Ring (C clip)
40mm x 80mm x 18mm
Made in Japan

"6208NR
"6208NR

6208NR Nachi Bearing with a Snap Ring, Made in Japan. the 6208NR inner diameter is 40mm, the 6208NR outer diameter is 80mm, 6208NR width is 18mm.

  • Item: 6208NR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearings
  • Radial Clearance: C3
  • Dimensions: 40mm x 80mm x 18mm/Metric
  • ID (inner diameter)/Bore: 40mm
  • OD (outer diameter): 80mm
  • Width/Height/thickness: 18mm
  • Size: 40 x 80 x 18 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 29,100 N
  • Static load rating Cor: 17,900 N
  • Limiting Speed:
    • Grease Lubrication: 8,700 RPM
    • Oil Lubrication: 10,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit12551


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
I would buy this product again January 29, 2014
Reviewer: Anonymous Person from danmcdivot@aol.com  
5

Was this review helpful to you?