VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

6207-2NSENR Nachi Bearing Sealed C3 Snap Ring Japan 35x72x17 Bearings
6207-2NSENR Nachi Bearing Sealed C3 Snap Ring Japan 35x72x17 Bearings


 
Our Price: $22.49
. Item: 6207-2NSENR Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Closures: Double sealed rubber seals RS/RS1/2RS1
. Radial Clearance: C3
. Dimensions: 35mm x 72mm x 17mm/Metric

Stock Status:In Stock
Product Code: KIT9775
Qty:

Description
 
6207-2NSENR Nachi Bearing
With Snap Ring (C clip)
35mm x 72mm x 17mm
Made in Japan


"6207-2NSENR
"6207-2NSENR

6207-2NSENR Nachi Bearing with a Snap Ring, the 6207-2NSENR inner diameter is 35mm, the 6207-2NSENR outer diameter is 72mm, 6207-2NSENR width is 17mm.

  • Item: 6207-2NSENR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Closures: Double sealed rubber seals RS/RS1/2RS1
  • Radial Clearance: C3
  • Dimensions: 35mm x 72mm x 17mm/Metric
  • ID (inner diameter)/Bore: 35mm
  • OD (outer diameter D1): 72mm
  • Width/Height/thickness: 17mm
  • Size: 35 x 72 x 17 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 25,700 N
  • Static load rating Cor: 15,300 N
  • Limiting Speed:
    • Grease Lubrication: 6,300 RPM
  • Equal: 6207 RS / 6207 2RS
  • Made in Japan

Advanced Seal Design Provides
Excellent Protection and Smooth Operation

The combination of a unique lip design and seal groove provides a labrinth and steady seal contact.Breathing mechanism avoids torque increases caused byinternal pressure variation due to changes in operating temperatures.NSE seals allow NACHI bearings to have constant smooth operation and long service life.

  • Superior in Sealing Out Dust, Dirt, and Contamination
  • Superb Grease Retention
  • Light Torque
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

  • 6207-2NSENR Nachi Bearing Sealed C3 Snap Ring Japan 35x72x17 Bearings


    Kit9775


    Average Rating: 4 of 5 Total Reviews: 1 Write a review »

      0 of 0 people found the following review helpful:
     
    Got my vintage snowmobile up and running March 29, 2013
    Reviewer: VintageRider  
    I used the Nachi bearing on my vintage 440 snowmobile engine. (crankshaft PTO side) It fit as good as the orignal bearing. The only trouble I had was the snap ring was to big for this application so I was forced to use the old ring. Not a problem. I would buy another one if I needed it. Had it shipped to my door cheaper then getting one from a snowmobile dealer.

    Was this review helpful to you?