VXB Ball Bearings

 





  Home > Bearing By Types > Auto & Outdoor Bearing > Snowmobile Bearings >

6204 Nachi Bearing Open C3 Japan 20x47x14
6204 Nachi Bearing Open C3 Japan 20x47x14
6204 Nachi Bearing Open C3 Japan 20x47x14


 
Our Price: $7.77
. Item: 6204 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 20mm x 47mm x 14mm/Metric
. ID (inner diameter)/Bore: 20mm

Stock Status:In Stock
Product Code: KIT9836
Qty:

Description
 
6204 Nachi Bearing
20mm x 47mm x 14mm
Made in Japan


6204 Nachi Bearing, Made in Japan, the 6204 inner diameter is 20mm, the 6204 outer diameter is 47mm and the 6204 width is 14mm.

  • Item: 6204 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 20mm x 47mm x 14mm/Metric
  • ID (inner diameter)/Bore: 20mm
  • OD (outer diameter): 47mm
  • Width/Height/thickness: 14mm
  • Size: 20 x 47 x 14 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 12,800 N
  • Static load rating Cor: 6,600 N
  • Limiting Speed:
    • Grease Lubrication: 16,000 RPM
    • Oil Lubrication: 18,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9836


Average Rating: 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Quick delivery of exactly what I needed. February 6, 2015
Reviewer: DR from Calhoun Falls, S.C.  
Bearings worked great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
REALLY REALLY GOOD PRICE FOR BEARINGS July 2, 2011
Reviewer: roadcruiser from Colorado Springs CO  
Was looking for bearings for rebuilding a motorcycle engine. Found these and ordered immediately. [...]

Was this review helpful to you?