VXB Ball Bearings

 





  Home > Metric Bearings > 15mm inner diameter Bearings >

  6202NR Nachi Bearing Open C3 Snap Ring Japan 15x35x11
6202NR Nachi Bearing Open C3 Snap Ring Japan 15x35x11


 
Our Price: $6.88
. Item: 6202NR Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearings
. Radial Clearance: C3
. Dimensions: 15mm x 35mm x 11mm/Metric
. Bearing Inner Diameter: 15mm

Stock Status:In Stock
Product Code: KIT9924
Qty:

Description
 
6202NR Nachi Bearing With Snap Ring (C clip)
15mm x 35mm x 11mm
Made in Japan


"6202NR
"6202NR

6202NR Nachi Bearing with a Snap Ring, the 6202NR inner diameter is 15mm, the 6202NR outer diameter is 35mm, 6202NR width is 11mm, Made in Japan.

  • Item: 6202NR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearings
  • Radial Clearance: C3
  • Dimensions: 15mm x 35mm x 11mm/Metric
  • Bearing Inner Diameter: 15mm
  • Bearing Outer Diameter: 35mm
  • Bearing Width: 11mm
  • Size: 15 x 35 x 11 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 7,650 N
  • Static load rating Cor: 3,700 N
  • Limiting Speed:
    • Grease Lubrication: 20,000 RPM
    • Oil Lubrication: 24,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9924


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Ball bearing February 18, 2016
Reviewer: Larry Morris from Lyons, OR United States  
Excellent quality bearing and very fast shipment. I was pleasantly surprised to find a bearing of the same manufacturer as its box! VXB has the largest selection of bearings imaginable,I look forward to my future business with them.

Was this review helpful to you?