VXB Ball Bearings

 





  Home > Metric Bearings > 12mm inner diameter Bearings >

  6201 Nachi Bearing Open C3 Japan 12x32x10
6201 Nachi Bearing Open C3 Japan 12x32x10
6201 Nachi Bearing Open C3 Japan 12x32x10


 
Our Price: $5.49
. Item: 6201 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 12mm x 32mm x 10mm/Metric
. ID (inner diameter)/Bore: 12mm

Stock Status:In Stock
Product Code: KIT9833
Qty:

Description
 
6201 Nachi Bearing
12mm x 32mm x 10mm
Made in Japan



6201 Nachi Bearing, Made in Japan, the 6201 inner diameter is 12mm, the 6201 outer diameter is 32mm and the 6201 width is 10mm.

  • Item: 6201 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 12mm x 32mm x 10mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 32mm
  • Width/Height/thickness: 10mm
  • Size: 12 x 32 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 6,800 N
  • Static load rating Cor: 3,050 N
  • Limiting Speed:
    • Grease Lubrication: 22,000 RPM
    • Oil Lubrication: 28,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9833


Average Rating: 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
6201 Nachi Bearing February 13, 2015
Reviewer: Rob from Houston, Texas  
I used the bearing to replace a graphite bearing in an angle grinder.  The bearing fits and works perfectly.  The only thing I should have done is ordered a sealed bearing rather than an open one.

Was this review helpful to you?