VXB Ball Bearings

 





  Home > Metric Miniature Bearings > 8mm inner diameter Bearings >

  608-2RS EZO/Nachi Bearing Sealed Japan 8x22x7
608-2RS EZO/Nachi Bearing Sealed Japan 8x22x7


 
Our Price: $5.37
. Item: 608-2RS EZO/Nachi Ball Bearing
. Type: EZO/Nachi Deep groove Ball Bearing
. Closures: Sealed
. Dimensions: 8mm x 22mm x 7mm/Metric
. ID (inner diameter)/Bore: 8mm

Stock Status:In Stock
Product Code: KIT13532
Qty:

Description
 
608-2RS EZO/Nachi Sealed Ball Bearing
8mm x 22mm x 7mm
Made in Japan


"608-2RS
"608-2RS

608-2RS EZO/Nachi Sealed Ball Bearing, inner diameter is 8mm, outer diameter is 22mm and width is 7mm, Made in Japan

  • Item: 608-2RS EZO/Nachi Ball Bearing
  • Type: EZO/Nachi Deep groove Ball Bearing
  • Closures: Sealed
  • Dimensions: 8mm x 22mm x 7mm/Metric
  • ID (inner diameter)/Bore: 8mm
  • OD (outer diameter): 22mm
  • Width/Height/thickness: 7mm
  • Size: 8 x 22 x 7 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 3,300 N
  • Static load rating Cor: 1,350 N
  • Limiting Speed:
    • Grease Lubrication: 34,000 RPM
    • Oil Lubrication: 41,000 RPM
  • Made in Japan

608-2RS EZO/Nachi Bearing Sealed Japan 8x22x7


Kit13532


Average Rating: 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
ball brg March 23, 2016
Reviewer: John Bingman from Blanchard, OK United States  
exactly what I wanted and expected

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good example of what an internet vendor should be November 29, 2015
Reviewer: Mike  
It's all good.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Chat was smart and timely. January 20, 2014
Reviewer: sparky  
The bearings were a quality replacement.  Well satisfied with the service and shipping.  Would definitely order again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice quality November 15, 2013
Reviewer: engineer2 from Chicago  
These will fit a Fantech FR150 ventilating fan. Fantech says you can't rebuild their fans  but it's pretty easy. Be aware that rubber seals have higher friction than shields. If you use them in a low power motor  it may run hot. I ended up using one RS and one ZZ bearing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
quality replacement bearings March 28, 2012
Reviewer: shofarshowgood  
replaced blowerbearings on pellet stove

Was this review helpful to you?

View All Customer Reviews