VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

6030 Nachi Bearing Open C3 Japan 150x225x35 Large
6030 Nachi Bearing Open C3 Japan 150x225x35 Large


 
Our Price: $305.88
. Item: 6030 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 150mm x 225mm x 35mm/Metric
. ID (inner diameter)/Bore: 150mm

Stock Status:In Stock
Product Code: KIT9828
Qty:

Description
 
6030 Nachi Bearing
150mm x 225mm x 35mm
Made in Japan


"6030
"6030

6030 Nachi Bearing, Made in Japan, the 6030 inner diameter is 150mm, the 6030 outer diameter is 225mm, 6030 width is 35mm.

  • Item: 6030 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 150mm x 225mm x 35mm/Metric
  • ID (inner diameter)/Bore: 150mm
  • OD (outer diameter): 225mm
  • Width/Height/thickness: 35mm
  • Size: 150 x 225 x 35 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 126,000 N
  • Static load rating Cor: 126,000 N
  • Limiting Speed:
    • Grease Lubrication: 2,600 RPM
    • Oil Lubrication: 3,200 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9828


Share your knowledge of this product. Be the first to write a review »