VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

  6018 Nachi Bearing Open C3 Japan 90x140x24
6018 Nachi Bearing Open C3 Japan 90x140x24
6018 Nachi Bearing Open C3 Japan 90x140x24


 
Our Price: $79.77
. Item: 6018 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 90mm x 140mm x 24mm/Metric
. ID (inner diameter)/Bore: 90mm

Stock Status:In Stock
Product Code: KIT9820
Qty:

Description
 
6018 Nachi Bearing
90mm x 140mm x 24mm
Made in Japan


6018 Nachi Bearing, Made in Japan, the 6018 inner diameter is 90mm, the 6018 outer diameter is 140mm, 6018 width is 24mm.

  • Item: 6018 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 90mm x 140mm x 24mm/Metric
  • ID (inner diameter)/Bore: 90mm
  • OD (outer diameter): 140mm
  • Width/Height/thickness: 24mm
  • Size: 90 x 140 x 24 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 58,000 N
  • Static load rating Cor: 49,500 N
  • Limiting Speed:
    • Grease Lubrication: 4,800 RPM
    • Oil Lubrication: 5,600 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9820


Share your knowledge of this product. Be the first to write a review »