VXB Ball Bearings

 





  Home > Metric Bearings > 20mm inner diameter Bearings >

6004NR Nachi Bearing 20x42x12:Open:C3:Snap Ring:Japan
6004NR Nachi Bearing 20x42x12:Open:C3:Snap Ring:Japan


 
Our Price: $7.37
. Item: 6004 Nachi Ball Bearings
. Dimensions: 20*42*12 mm/Metric
. Dynamic load rating Cr: 9,400 N
. Static load rating Cor: 5,000 N
. Limiting Speed:

Stock Status:In Stock
Product Code: KIT9900
Qty:

Description
 

Nachi Bearings
6004 NR
20mm x 42mm x 12mm
With Snap Ring (C clip)
Made in Japan





6004 Nachi Bearing, Made in Japan, with a Snap Ring, here are the dimensions of the 6004, the 6004 inner diameter is 20mm, the 6004 outer diameter is 42mm, 6004 width is 12mm.

  • Item: 6004 Nachi Ball Bearings
  • Dimensions: 20*42*12 mm/Metric
  • Dynamic load rating Cr: 9,400 N
  • Static load rating Cor: 5,000 N
  • Limiting Speed:
    • Grease Lubrication: 18,000 RPM
    • Oil Lubrication: 21,000 RPM
  • ID (inner diameter)/Bore=20mm
  • OD (outer diameter D1)=42mm
  • Width/Height/thickness=12mm
  • Radial Clearance: C3
  • 6004 Type: Nachi Deep groove Ball Bearings
  • Size: 20mm x 42mm x 12mm
  • Made in Japan
  • Quantity: One Bearing 6004

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9900


Share your knowledge of this product. Be the first to write a review »