VXB Ball Bearings

 





  Home > Bearing By Types > Auto & Outdoor Bearing > Snowmobile Bearings >

6004 Nachi Bearing Open C3 Japan 20x42x12
6004 Nachi Bearing Open C3 Japan 20x42x12
6004 Nachi Bearing Open C3 Japan 20x42x12


 
Our Price: $7.77
. Item: 6004 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 20mm x 42mm x 12mm/Metric
. ID (inner diameter)/Bore: 20mm

Stock Status:(Out of Stock)
Product Code: KIT9806
Qty:

Description
 
6004 Nachi Bearing
20mm x 42mm x 12mm
Made in Japan


6004 Nachi Bearing, Made in Japan, here are the dimensions of the 6004, the 6004 inner diameter is 20mm, the 6004 outer diameter is 42mm and the 6004 width is 12mm.

  • Item: 6004 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 20mm x 42mm x 12mm/Metric
  • ID (inner diameter)/Bore: 20mm
  • OD (outer diameter): 42mm
  • Width/Height/thickness: 12mm
  • Size: 20 x 42 x 12 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 9,400 N
  • Static load rating Cor: 5,000 N
  • Limiting Speed:
    • Grease Lubrication: 18,000 RPM
    • Oil Lubrication: 21,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit9806


Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
Great prices great bearings July 23, 2013
Reviewer: RT from Augusta Ga.  
This bearing went into a 2HP outboard motor.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
twincam outer cam bearing May 24, 2011
Reviewer: mbzrider from San Jose Ca  
pricing is very good [$] ea compared to dealer pricing [$] easame bearing same manufacturer??? imagine that

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good bearing for HD gear driven cams October 26, 2010
Reviewer: Max Headflow  
This is the same bearing supplied from Andrews with their gear cams kit.

Was this review helpful to you?