VXB Ball Bearings

 





  Home > Metric Bearings > 17mm inner diameter Bearings >

  6003ZZE Nachi Bearing Shielded C3 Japan 17x35x10
6003ZZE Nachi Bearing Shielded C3 Japan 17x35x10


 
Our Price: $8.77
. Item: 6003ZZE Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Closures: Double shielded with Metal shields Z/ZZ/2Z
. Radial Clearance: C3
. Dimensions: 17mm x 35mm x 10mm/Metric

Stock Status:In Stock
Product Code: KIT9533
Qty:

Description
 
6003ZZE Shielded Nachi Bearing
One Bearing
Made in Japan


"6003ZZE
"6003ZZE

6003ZZE Nachi Bearing, the 6003ZZE inner diameter is 17mm, the 6003ZZE outer diameter is 35mm, 6003ZZE width is 10mm.

  • Item: 6003ZZE Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Closures: Double shielded with Metal shields Z/ZZ/2Z
  • Radial Clearance: C3
  • Dimensions: 17mm x 35mm x 10mm/Metric
  • ID (inner diameter)/Bore: 17mm
  • OD (outer diameter): 35mm
  • Width/Height/thickness: 10mm
  • Size: 17 x 35 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 6,000 N
  • Static load rating Cor: 3,250 N
  • Limiting Speed:
    • Grease Lubrication: 22,000 RPM
  • Equal: 6003 ZZ / 6003 2Z
  • Made in Japan

Advanced Shield Design Provides
Superior Protection and Quiet Operation

The shield design was optimized using dynamic analysis modeling techniques.The design profile and plate thickness provides rigidity that helps quiet operation as well asretain grease and protect against intrusion of major contamination.

  • Superior in Sealing Out Contamination
  • Superb Grease Retention
  • Quiet Operation
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

  • 6003ZZE Nachi Bearing Shielded C3 Japan 17x35x10

    Kit9533


    Average Rating: 5 of 5 Total Reviews: 5 Write a review »

      0 of 0 people found the following review helpful:
     
    Just as Promised June 29, 2012
    Reviewer: Shadow  
    Replace [@] Craftsman router bearing.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Excellent service May 6, 2012
    Reviewer: ph from Quebec Canada  
    I was able to fix by bicycle with these bearing

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Bearings are top quality January 1, 2012
    Reviewer: Mac from Pittsburgh Pa  
    Replaced worn out headstock bearings in my Unimat 3 lathe. Works like the original!

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    very good I would buy again November 2, 2010
    Reviewer: chicken little from Green Bay Wi.  
    needed a quality product [...] good job!

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    excellent product October 31, 2010
    Reviewer: Ricky  
    excellent bearing  free spinning and quiet.

    Was this review helpful to you?