VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

6003NR Nachi Bearing Open C3 Snap Ring Japan 17x35x10
6003NR Nachi Bearing Open C3 Snap Ring Japan 17x35x10


 
Our Price: $7.37
. Item: 6003NR Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearings
. Radial Clearance: C3
. Dimensions: 17mm x 35mm x 10mm/Metric
. ID (inner diameter)/Bore: 17mm

Stock Status:In Stock
Product Code: KIT13413
Qty:

Description
 
6003NR Nachi Bearing With Snap Ring (C clip)
17mm x 35mm x 10mm
Made in Japan


"6003NR
"6003NR

6003NR Nachi Bearing with a Snap Ring, Made in Japan. the 6003NR inner diameter is 17mm, the 6003NR outer diameter is 35mm, 6003NR width is 10mm.

  • Item: 6003NR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearings
  • Radial Clearance: C3
  • Dimensions: 17mm x 35mm x 10mm/Metric
  • ID (inner diameter)/Bore: 17mm
  • OD (outer diameter D1): 35mm
  • Width/Height/thickness: 10mm
  • Size: 17mm x 35mm x 10mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 6,000 N
  • Static load rating Cor: 3,250 N
  • Limiting Speed:
    • Grease Lubrication: 22,000 RPM
    • Oil Lubrication: 26,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Kit13413


Share your knowledge of this product. Be the first to write a review »