VXB Ball Bearings

 





  Home > Bearing By Types > Auto & Outdoor Bearing > Go Kart Bearings >

  6003 Nachi Bearing Open C3 Japan 17x35x10
6003 Nachi Bearing Open C3 Japan 17x35x10
6003 Nachi Bearing Open C3 Japan 17x35x10


 
Our Price: $7.77
. Item: 6003 Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Dimensions: 17mm x 35mm x 10mm/Metric
. ID (inner diameter)/Bore: 17mm

Stock Status:In Stock
Product Code: KIT9805
Qty:

Description
 
6003 Nachi Bearing
17mm x 35mm x 10mm
Made in Japan


6003 Nachi Bearing, Made in Japan, here are the dimensions of the 6003, the 6003 inner diameter is 17mm, the 6003 outer diameter is 35mm and the 6003 width is 10mm.

  • Item: 6003 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 17mm x 35mm x 10mm/Metric
  • ID (inner diameter)/Bore: 17mm
  • OD (outer diameter): 35mm
  • Width/Height/thickness: 10mm
  • Size: 17 x 35 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 6,000 N
  • Static load rating Cor: 3,250 N
  • Limiting Speed:
    • Grease Lubrication: 22,000 RPM
    • Oil Lubrication: 26,000 RPM
  • Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.


Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
Fixed the Problem December 18, 2011
Reviewer: Shadow from Sunriver, OR  
Router bottom bearing finally wore out - lost its ball cage.  VBX provided exact replacement at one third the cost of the bearing from OEM.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Quality Fast Delivery November 25, 2011
Reviewer: Moped Medic from Charleston, SC  
After dealing with a large number of bearing failures in Chinese Scooters and Mopeds  we decided to try these. They have held up better than expected  and the Nachi Japanese bearings are a good replacement for any bearing in a Chinese Scooter or Moped.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
June 16, 2011
Reviewer: Master Trout Angler from Grand Rapids, Michigan  
These are replacement ball bearings for a Honda XR250 engine camshaft. Honda wants [$] each for these. Scoundrels  they are.

Was this review helpful to you?