VXB Ball Bearings

 





  Home > Metric Bearings > 12mm inner diameter Bearings >

  6001ZZE Nachi Bearing Shielded C3 Japan 12x28x8
6001ZZE Nachi Bearing Shielded C3 Japan 12x28x8
6001ZZE Nachi Bearing Shielded C3 Japan 12x28x8


 
Our Price: $6.88
. Item: 6001ZZE Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Closures: Double shielded with Metal shields Z/ZZ/2Z
. Radial Clearance: C3
. Dimensions: 12mm x 28mm x 8mm/Metric

Stock Status:In Stock
Product Code: KIT9531
Qty:

Description
 
6001ZZE Shielded Nachi Bearing
One Ball Bearing
Made in Japan



6001ZZE Shielded Nachi Bearing, the 6001ZZE inner diameter is 12mm, the 6001ZZE outer diameter is 28mm, 6001ZZE width is 8mm.

  • Item: 6001ZZE Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Closures: Double shielded with Metal shields Z/ZZ/2Z
  • Radial Clearance: C3
  • Dimensions: 12mm x 28mm x 8mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 28mm
  • Width/Height/thickness: 8mm
  • Size: 12 x 28 x 8 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 5,100 N
  • Static load rating Cor: 2,390 N
  • Limiting Speed:
    • Grease Lubrication: 28,000 RPM
  • Equal: 6001 ZZ / 6001 2Z
  • Made in Japan


Advanced Shield Design Provides
Superior Protection and Quiet Operation

The shield design was optimized using dynamic analysis modeling techniques.The design profile and plate thickness provides rigidity that helps quiet operation as well asretain grease and protect against intrusion of major contamination.

  • Superior in Sealing Out Contamination
  • Superb Grease Retention
  • Quiet Operation
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

  • 6001ZZE Nachi Bearing Shielded C3 Japan 12x28x8

    Kit9531


    Average Rating: 5 of 5 Total Reviews: 10 Write a review »

      0 of 0 people found the following review helpful:
     
    Great little bearing October 6, 2013
    Reviewer: Rtymer  
    Had to replace the bearing in my 1970's Craftsman die grinder.  These bearing fit perfectly and are quiet.  Highly recommend VXB Bearing for all your bearing needs.  These were Japan bearing not China.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Excellent products! September 20, 2013
    Reviewer: EagleDustoff37  
    Excellent products with no issues ever!

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Outstanding Company September 20, 2013
    Reviewer: EagleDustoff37 from Albuquerque New Mexico  
    Excellent replacement parts and best price when replacing bearings in your mini mill or mini lathe. I have used them to even rebuild a bandsaw!

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    great service August 25, 2013
    Reviewer: Jim  
    Product was for a 35 year old skill saw that the bearings had finally worn out.  Rather than spend $100+ on a new saw  I opted to replace the bearings.  Saw now works great. I was kind of surprised to find that the bearings were still available.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Well suited for application December 4, 2012
    Reviewer: Geoff  
    Used for spindle on a tool post grinder. Initial results show that they are up to the task.

    Was this review helpful to you?

    View All Customer Reviews