VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

  5210ZZ Nachi 2 Rows Angular Contact Bearing 50x90x30.2 Bearings
5210ZZ Nachi 2 Rows Angular Contact Bearing 50x90x30.2 Bearings


 
Our Price: $93.37
. Item: 5210ZZ Ball Bearing
. Type: Nachi Double Row Angular Ball Bearing
. Closures: Double Shielded
. Dimensions: 50mm x 90mm x 30.2mm/Metric
. ID (inner diameter)/Bore: 50mm

Stock Status:In Stock
Product Code: KIT10084
Qty:

Description
 
5210ZZ Nachi Double Row Angular Ball Bearing
50mm x 90mm x 30.2mm
Double Shielded
Made in Japan


"5210ZZ
"5210ZZ

5210ZZ Nachi Double Row Angular Ball Bearing, bearing is Double Shielded, Made in Japan, inner diameter is 50mm, outer diameter is 90mm and width is 30.2mm.

  • Item: 5210ZZ Ball Bearing
  • Type: Nachi Double Row Angular Ball Bearing
  • Closures: Double Shielded
  • Dimensions: 50mm x 90mm x 30.2mm/Metric
  • ID (inner diameter)/Bore: 50mm
  • OD (outer diameter): 90mm
  • Width/Height/thickness: 30.2mm
  • Size: 50 x 90 x 30.2 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 45,000 N
  • Static load rating Cor: 39,000 N
  • Limiting Speed:
    • Grease Lubrication: 5,000 RPM
  • Made in Japan

Nachi Double Row Angular Contact Bearing

The construction of this type ball bearing is similar to the adjacent, BACK-TO-BACK mounting of two Single-row Angular Contact ball bearings. Because fewer balls can be inserted per row compared to Single-row Angular Contact ball bearings, a Double-row Angular Contact ball bearing will have less load capacity than an equivalent size/series BACK-TO-BACK set of two Single-row Angular Contact ball bearings. This bearing type can sustain radial, moment and bi-directional axial loads.

Kit10084


Average Rating: 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Dunham Collet Closer Bearings January 29, 2014
Reviewer: TacticalKeychains from Iowa  
I wanted to delete my Oil Mist system on my Duhnam Collet closer for my GT-27 lathe.  So I ordered these as an upgrade  and so far it's running just fine without the oil mist.

Was this review helpful to you?