VXB Ball Bearings

 





  Home > Metric Miniature Bearings > 8mm inner diameter Bearings >

  5 Sets Quality Speed Skateboard Shielded Bearing
5 Sets Quality Speed Skateboard Shielded Bearing


 
Our Price: $41.49
. Item: 7004CYDUP4BNLS Angular Ball Bearing
. Type: Nachi Angular Ball Bearing
. Dimensions: 20mm x 42mm x 12mm/Metric
. Bearing Inner Diameter: 20mm
. Bearing Outer Diameter: 42mm

Stock Status:In Stock
Product Code: KIT8902
Qty:

Description
 
7004CYDUP4BNLS Nachi Angular Abec-5 Ball Bearings
20mm x 42mm x 12mm
15 Contact Angle
Polyamide resin cage
Made in Japan


7004CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7004CYDUP4BNLS inner diameter is 20mm, 7004CYDUP4BNLS outer diameter is 42mm, 7004CYDUP4BNLS width is 12mm.

  • Item: 7004CYDUP4BNLS Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 20mm x 42mm x 12mm/Metric
  • Bearing Inner Diameter: 20mm
  • Bearing Outer Diameter: 42mm
  • Bearing Width: 12mm
  • Size: 20 x 42 x 12 mm
  • Cage: Polyamide resin cage
  • Quality: ABEC-5
  • Basic Dynamic Load Cr (KN): 11.2
  • Made in Japan
  • Quantity: One Bearing


dDBrr1
20mm42mm12mm0.6 0.3

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit8902


Share your knowledge of this product. Be the first to write a review »